Audio Electronic Circuit Schematics

Talk about music gear for noise music

Moderator: xome

User avatar
GEHIRN
Posts: 4
Joined: Sat Dec 19, 2015 2:40 pm

Post by GEHIRN » Tue Feb 02, 2016 7:30 am

so im new to soldering and i was wondering if any of you can hit me up with a schematic/tutorial for putting a killswitch onto a shaker box

will be much appreciated!

User avatar
ablablablablabla
Posts: 1712
Joined: Tue Nov 28, 2006 1:03 am
Location: Noise
Contact:

Post by ablablablablabla » Tue Feb 02, 2016 8:53 am

it's so simple that drawing schematics for it is silly..

cut the wire to the output in your box and add a switch:

Image

the one wire goes to the center pin and the other goes to either of the other pins...
"I dance very slowly. The entire thing takes several months, you don't really notice it"
- Bipolar Joe

User avatar
Misomusist
Posts: 681
Joined: Fri May 07, 2010 7:35 pm

Post by Misomusist » Tue Feb 02, 2016 12:13 pm

Or you know, google.

Image
I think trying to quantify music is one of the biggest wastes of time in the world, like discussing your favourite colour or deity or pizza topping. People should realise that and get on with their life.

Image

User avatar
WhiteWarlock
Posts: 118
Joined: Tue Apr 10, 2018 7:58 am

Re: Audio Electronic Circuit Schematics

Post by WhiteWarlock » Tue Apr 10, 2018 8:11 am

Image
First post.... have some basic things from my collection
Arp
Image Baldwin
Image Buchla
Image Crumar
Image Electric Dream Plant
Image Electro Harmonix
Image Electrocomp EML
Image EMS
Image Kawai
Image Korg
Image Moog
Image Oberheim
Image Octave Plateau
Image Oxford Synthesiser Company
Image Roland
Image Sequential Circuits
Image Yamaha
Image That should be good enough start for ideas...
Mutate at will
Image

User avatar
timdrage
Posts: 4788
Joined: Sun Feb 05, 2006 11:08 am
Contact:

Re: Audio Electronic Circuit Schematics

Post by timdrage » Tue Apr 10, 2018 8:21 am

Niice :)

everyone with any interest in synthesis should read the Arp 2600 Owner’s Manual even if they never actually use one :D

User avatar
melkobukva
Posts: 47
Joined: Thu Jan 04, 2018 6:35 pm

Re: Audio Electronic Circuit Schematics

Post by melkobukva » Tue Apr 10, 2018 10:20 am

WhiteWarlock wrote:
Tue Apr 10, 2018 8:11 am
First post.... have some basic things from my collection
:hail:

User avatar
WhiteWarlock
Posts: 118
Joined: Tue Apr 10, 2018 7:58 am

Re: Audio Electronic Circuit Schematics

Post by WhiteWarlock » Tue Apr 10, 2018 11:25 am

Vero/StripBoard for people not scared of doing some basic soldering
https://www.youtube.com/watch?v=PLy6YVjjn38
nicolas3141

Joined: May 25, 2007
Posts: 185
Location: Christchurch, New Zealand


Veroboard is great and not difficult to use. If you must have the most compact design it can be frustrating, but if you are happy to use just a little more space it makes things a lot more enjoyable. Same with PCB design I guess. Anyway, my recipe for easy veroboard layout goes like this:

1. Start with a piece of veroboard about 80mm square. It usually doesn't need to be quite as big as that, but the extra gives you some room for later kludges if necessary. Or for a simple circuit 50mm square is plenty.

2. Align all the chips in a row (line astern) with about 3 stripes in between each one. Most veroboard comes in widths of about 80mm, so this technique works best for circuits with no more than three 14/16 pin chips or five 8 pin chips.

3. Use a mini grinder or similar tool to cut all the tracks from one side to the other underneath the line of chips. Its _much_ easier to cut all the tracks in one line rather than fuss about cutting some here and some there.

4. Run resistors, caps and wire links parallel to the line of chips wherever possible.

5. Designate one stripe between each chip as a ground and use a wire link to bridge the cut you just made.

6. If you need to cross the line of chips with a wire or resistor, I recommend doing it on the copper side of the board, so all my vertical oriented components are on one side and laterals on the other. I also recommend attaching front panel wires on the copper side (surface mount fashion) rather than through the holes.

Doing it this way you can often get away with building direct from a schematic rather than having to go through a separate board design process.

Cheers,
Nicolas
Image

Image

Image

Image

Image

Image

Woolaston ADSR PCB LAYOUT

Image
Image
Image

Image

Image

Image

Image

Image

tri2saw
Image

vca-simpler
Image


Touch sensitive noise - cracklebox derivative[/b][/size]
Image

Image

Simple ribbon controller for V/Hz synth:
http://electro-music.com/forum/topic-32651.html

Super simple V/Hz VCO:
http://electro-music.com/forum/topic-32689.html

Pitch-not-critical Sooper-Simple VCO;
http://www.electro-music.com/forum/topic-38087.html

Simple sawtooth VCO
http://electro-music.com/forum/post-292718.html

V/Hz state variable filter:
http://electro-music.com/forum/topic-34426.html

Noise source:
http://electro-music.com/forum/topic-34745.html

TRI2SAW:
http://electro-music.com/forum/topic-27934.html

ADSR:
http://electro-music.com/forum/topic-31473.html

LFO & VCLFO:
http://electro-music.com/forum/topic-32372.html

Simple S&H and VCA
http://electro-music.com/forum/topic-41277.html


updated and edited, 08-05-10, by v-un-v

Image

Image
Image
Image
Image
some super simple Woolaston vero/strip boards for you "Freaks" from the archives
we have built several of these designs
hertz VCOs
works with Korg ms20,ms10,ms50,x911,old yamaha cs, & vintage PAIA plus modular FATMAN
good examples for basic vero/stripboard DIY method

MKULTRA
Posts: 2630
Joined: Sat Sep 13, 2008 6:04 am

Re: Audio Electronic Circuit Schematics

Post by MKULTRA » Tue Apr 10, 2018 11:57 am

WhiteWarlock, welcome. Glad you followed the link.
That is a nice addition to the thread.

But where are the Synclavier schematics?
Step up your game son.

User avatar
WhiteWarlock
Posts: 118
Joined: Tue Apr 10, 2018 7:58 am

Re: Audio Electronic Circuit Schematics

Post by WhiteWarlock » Tue Apr 10, 2018 12:04 pm

probably somewhere near folder with all the Fairlight CMI IIx sample libraries eye made for ensoniq .efe format....
obviously anyone that owns Synclavier can afford paying for some original schematics:P
haven't gotten my hands near one.... yet
or may have been in the same room with it ages ago and didn't even have clue what it was back then

User avatar
WhiteWarlock
Posts: 118
Joined: Tue Apr 10, 2018 7:58 am

Re: Audio Electronic Circuit Schematics

Post by WhiteWarlock » Tue Apr 10, 2018 12:20 pm

Where's your avatar MindKontrolled slacker????
speaking of slack and Avatar's
need repairing the LFO & S/H in Mine...
Doh!

User avatar
R.Nick
Posts: 3
Joined: Thu Apr 19, 2018 1:36 am

Re: Audio Electronic Circuit Schematics

Post by R.Nick » Thu Apr 19, 2018 1:50 am

You can buy bitcoins almost anywhere, the main thing is to find the right resource: http://bitcoinbestbuy.com/countries/ . After all, cryptocurrency is a very dangerous and risky business,but who does not risk that

User avatar
WhiteWarlock
Posts: 118
Joined: Tue Apr 10, 2018 7:58 am

Re: Audio Electronic Circuit Schematics

Post by WhiteWarlock » Thu Apr 19, 2018 6:32 pm

would you go peddle you cybershekels somewhere else

Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests